| sndwvs |
05-02-2023 02:37 PM |
installation README.TXT
kernel 5.10.110
slarm64-current-aarch64-core-rock_5-5.10.110-build-20230502.img.zst
slarm64-current-aarch64-core-rock_5-5.10.110-build-20230502.img.zst.sha256
slarm64-current-aarch64-server-rock_5-5.10.110-build-20230502.img.zst
slarm64-current-aarch64-server-rock_5-5.10.110-build-20230502.img.zst.sha256
slarm64-current-aarch64-xfce-rock_5-5.10.110-build-20230502.img.zst
slarm64-current-aarch64-xfce-rock_5-5.10.110-build-20230502.img.zst.sha256
Code:
DDR Version V1.08 20220617
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=16 Size=4096MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=16 Size=4096MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=16 Size=4096MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=16 Size=4096MB
Manufacturer ID:0xff
CH0 RX Vref:26.7%, TX Vref:22.8%,22.8%
CH1 RX Vref:29.7%, TX Vref:21.8%,21.8%
CH2 RX Vref:24.7%, TX Vref:24.8%,23.8%
CH3 RX Vref:28.7%, TX Vref:23.8%,23.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-rk3588 (May 02 2023 - 21:59:05)
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(bb1bbbc832...) + OK
## Checking uboot 0x00200000 ... sha256(375d6e529a...) + OK
## Checking fdt 0x00311908 ... sha256(83adf972b8...) + OK
## Checking atf-2 0x000f0000 ... sha256(30812190d0...) + OK
## Checking atf-3 0xff100000 ... sha256(cb7bdbec2b...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 584.47 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-499-ge63a16361:derrick.huang
NOTICE: BL31: Built : 10:58:38, Jan 10 2023
INFO: spec: 0x1
INFO: ext 32k is not valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-rk3588 (May 02 2023 - 22:00:59 +0300)
Model: Radxa ROCK 5B
PreSerial: 2, raw, 0xfeb50000
DRAM: 15.7 GiB
Sysmem: init
Relocation Offset: eda65000
Relocation fdt: eb9f95d8 - eb9fecd0
CR: M/C/I
Using default environment
mmc@fe2c0000: 0, mmc@fe2e0000: 1
Bootdev(atags): mmc 0
MMC0: Legacy, 52Mhz
PartType: EFI
DM: v1
boot mode: normal
Model: Radxa ROCK 5B
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
b0pll 24000 KHz
b1pll 24000 KHz
lpll 24000 KHz
v0pll 24000 KHz
aupll 24000 KHz
cpll 1500000 KHz
gpll 1188000 KHz
npll 24000 KHz
ppll 1100000 KHz
aclk_center_root 702000 KHz
pclk_center_root 100000 KHz
hclk_center_root 396000 KHz
aclk_center_low_root 500000 KHz
aclk_top_root 750000 KHz
pclk_top_root 100000 KHz
aclk_low_top_root 396000 KHz
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'): 0
switch to partitions #0, OK
mmc0 is current device
mmc@fe2c0000: 0 (SD)
mmc@fe2e0000: 1
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
2604 bytes read in 10 ms (253.9 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 0
173 bytes read in 13 ms (12.7 KiB/s)
250246 bytes read in 127 ms (1.9 MiB/s)
30685696 bytes read in 15022 ms (1.9 MiB/s)
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
6397 bytes read in 86 ms (72.3 KiB/s)
Applying kernel provided DT overlay rockchip-rk3588-opp-oc-24ghz.dtbo
** File not found /dtb/rockchip/overlay/rockchip-fixup.scr **
17672258 bytes read in 8165 ms (2.1 MiB/s)
Fdt Ramdisk skip relocation
## Loading init Ramdisk from Legacy Image at 0a200000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 17672194 Bytes = 16.9 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 0x0a100000
Booting using the fdt blob at 0x0a100000
reserving fdt memory region: addr=a100000 size=a3000
'reserved-memory' cma: addr=10000000 size=10000000
'reserved-memory' ramoops@110000: addr=110000 size=f0000
Using Device Tree in place at 000000000a100000, end 000000000a1a5fff
Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000)
Adding bank: 0x100000000 - 0x3fc000000 (size: 0x2fc000000)
Adding bank: 0x3fc500000 - 0x3fff00000 (size: 0x03a00000)
Total: 23936.88 ms
Starting kernel ...
[ 25.766532] fiq_debugger fiq_debugger.0: IRQ fiq not found
[ 25.766545] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[ 25.766552] fiq_debugger_probe: could not install nmi irq handler
[ 26.678841] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[ 26.679327] rk-pcie fe170000.pcie: IRQ msi not found
[ 26.679338] rk-pcie fe170000.pcie: Missing *config* reg space
[ 26.679407] rk-pcie fe170000.pcie: Missing *config* reg space
[ 26.679432] rk-pcie fe170000.pcie: invalid resource
[ 26.690336] rk-pcie fe150000.pcie: IRQ msi not found
[ 26.690369] rk-pcie fe150000.pcie: Missing *config* reg space
[ 26.690497] rk-pcie fe150000.pcie: Missing *config* reg space
[ 26.690534] rk-pcie fe150000.pcie: invalid resource
[ 26.690613] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[ 26.690622] rkvdec2_init:1008: No niu aclk reset resource define
[ 26.690628] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[ 26.690634] rkvdec2_init:1011: No niu hclk reset resource define
[ 26.691281] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[ 26.691288] rkvdec2_init:1008: No niu aclk reset resource define
[ 26.691295] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[ 26.691300] rkvdec2_init:1011: No niu hclk reset resource define
[ 26.756070] rk806 spi2.0: no sleep-setting state
[ 26.756087] rk806 spi2.0: no reset-setting pinctrl state
[ 26.756094] rk806 spi2.0: no dvs-setting pinctrl state
[ 27.088394] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 27.103427] debugfs: File 'Capture' in directory 'dapm' already present!
[ 27.104444] rk-multicodecs es8316-sound: ASoC: Property 'rockchip,audio-routing' does not exist or its length is not even
[ 27.719817] mmc1: delay init for 600 ms to enable UHS mode
[ 27.721209] debugfs: File 'Left Hp mixer' in directory 'dapm' already present!
[ 27.721257] debugfs: File 'Right Hp mixer' in directory 'dapm' already present!
[ 27.721295] debugfs: File 'HPCP L' in directory 'dapm' already present!
[ 27.721318] debugfs: File 'HPCP R' in directory 'dapm' already present!
[ 27.721348] debugfs: File 'HPVOL L' in directory 'dapm' already present!
[ 27.721370] debugfs: File 'HPVOL R' in directory 'dapm' already present!
[ 27.768422] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[ 27.771562] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[ 27.771600] rockchip-dmc dmc: failed to get vop pn to msch rl
[ 27.772693] rockchip-dmc dmc: could not find power_model node
[ 27.780291] rk-pcie fe190000.pcie: IRQ msi not found
[ 27.780319] rk-pcie fe190000.pcie: Missing *config* reg space
[ 27.780426] rk-pcie fe190000.pcie: Missing *config* reg space
[ 27.780447] rk-pcie fe190000.pcie: invalid resource
[ 27.784324] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[ 27.784363] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[ 27.784386] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[ 27.788526] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[ 27.810214] RKNPU fdab0000.npu: failed to find power_model node
[ 27.810241] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[ 27.810254] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[ 29.152386] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
[ 31.355973] BUG: spinlock bad magic on CPU#5, udevd/468
[ 31.356019] lock: 0xffffffc012a29080, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
=======================================================================
if you want to transfer the system to SDcard to internal memory (eMMC or NAND),
follow transfer-to-disk
=======================================================================
slarm64 GNU/Linux (ttyFIQ0)
Kernel 5.10.110 (aarch64)
rock-5 login:
|
