Intel wifi: WRT: Invalid buffer destinations

hd_scania · 02-09-2024, 06:45 AM

I finally expect both wifi and bluetooth to be normally working

Code:

% pacman -Ss linux|grep -Eie installed
system/linux 6.7.4.artix1-1 [installed]
system/linux-api-headers 6.7-1 [installed]
system/linux-firmware 20240115.9b6d0b08-2 [installed]
system/linux-firmware-whence 20240115.9b6d0b08-2 [installed]
system/linux-headers 6.7.4.artix1-1 [installed]
galaxy/linux-firmware-whence-xz 20230625.ee91452d-4 [installed]
galaxy/linux-firmware-xz 20230625.ee91452d-4 [installed]
% doas lsfw -C network
% lspci -nnk|grep -Eie 'intel|iwl'
03:00.0 Network controller [0280]: Intel Corporation Wi-Fi 6E(802.11ax) AX210/AX1675* 2x2 [Typhoon Peak] [8086:2725] (rev 1a)
        Subsystem: Intel Corporation Wi-Fi 6 AX210 160MHz [8086:0024]
        Kernel driver in use: iwlwifi
        Kernel modules: iwlwifi
% doas lshw -C network
  *-network                 
       description: Wireless interface
       product: Wi-Fi 6E(802.11ax) AX210/AX1675* 2x2 [Typhoon Peak]
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: wlan0
       version: 1a
       serial: 56:b2:00:28:c6:9b
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwlwifi driverversion=6.7.4-artix1-1 firmware=86.fb5c9aeb.0 ty-a0-gf-a0-86.uc latency=0 link=no multicast=yes wireless=IEEE 802.11
       resources: irq:109 memory:fcd00000-fcd03fff
% doas lsmod|grep -Eie iwl
iwlmvm                708608  0
mac80211             1568768  1 iwlmvm
iwlwifi               573440  1 iwlmvm
cfg80211             1343488  3 iwlmvm,iwlwifi,mac80211
rfkill                 40960  3 iwlmvm,bluetooth,cfg80211
% doas inxi -Fxz
System:
  Kernel: 6.7.4-artix1-1 arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    Console: pty pts/2 Distro: Artix Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: ASRock model: X300M-STX serial: <filter> UEFI: American
    Megatrends LLC. v: P1.70 date: 07/01/2021
CPU:
  Info: 8-core model: AMD Ryzen 7 PRO 4750G with Radeon Graphics bits: 64
    type: MT MCP arch: Zen 2 rev: 1 cache: L1: 512 KiB L2: 4 MiB L3: 8 MiB
  Speed (MHz): avg: 2100 high: 4303 min/max: 400/4454 cores: 1: 400 2: 3420
    3: 4303 4: 3203 5: 4295 6: 400 7: 3492 8: 400 9: 2861 10: 400 11: 400
    12: 3121 13: 400 14: 3077 15: 3040 16: 400 bogomips: 115038
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: AMD Renoir [Radeon RX Vega 6 ] driver: amdgpu v: kernel
    arch: GCN-5 bus-ID: 04:00.0 temp: 45.0 C
  Display: server: X.org v: 1.21.1.11 with: Xwayland v: 23.2.4 driver: X:
    loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu
    resolution: 3840x2400
  API: EGL v: 1.5 drivers: radeonsi,swrast platforms:
    active: surfaceless,device inactive: gbm,wayland,x11
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: mesa v: 23.3.5-arch1.1
    note: incomplete (EGL sourced) renderer: AMD Radeon Graphics (radeonsi
    renoir LLVM 16.0.6 DRM 3.57 6.7.4-artix1-1), llvmpipe (LLVM 16.0.6 256
    bits)
  API: Vulkan Message: No Vulkan data available.
Audio:
  Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel
    v: kernel bus-ID: 04:00.1
  Device-2: AMD Family 17h/19h HD Audio vendor: ASRock driver: snd_hda_intel
    v: kernel bus-ID: 04:00.6
  API: ALSA v: k6.7.4-artix1-1 status: kernel-api
  Server-1: sndiod v: N/A status: off
  Server-2: JACK v: 1.9.22 status: off
  Server-3: PipeWire v: 1.0.3 status: off
  Server-4: PulseAudio v: 17.0 status: active (root, process)
Network:
  Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel
    bus-ID: 03:00.0
  IF: wlan0 state: down mac: <filter>
  IF-ID-1: docker0 state: down mac: <filter>
  IF-ID-2: usb0 state: unknown speed: -1 duplex: half mac: <filter>
  IF-ID-3: wlan1 state: down mac: <filter>
Bluetooth:
  Device-2: Intel AX210 Bluetooth driver: btusb v: 0.8 type: USB
    bus-ID: 3-2.1:8
  Report: ID: hci0 rfk-id: 5 state: down bt-service: not found rfk-block:
    hardware: no software: no address: N/A
  Device-3: Realtek 802.11ac NIC driver: btusb,rtw_8821cu type: USB
    bus-ID: 3-2.2:5
  Report: ID: hci1 rfk-id: 1 state: down bt-service: not found rfk-block:
    hardware: no software: no address: N/A
  Device-4: Realtek 802.11ac NIC driver: btusb v: 0.8 type: USB
    bus-ID: 3-2.3:6
  Report: ID: hci2 rfk-id: 2 state: down bt-service: not found rfk-block:
    hardware: no software: no address: N/A
RAID:
  Device-1: ILi_INtJ-A4KNV2T71 type: zfs status: ONLINE level: linear raw:
    size: 2.7 TiB free: 1.9 TiB zfs-fs: size: 2.62 TiB free: 1.82 TiB
  Components: Online: 1:
  Device-2: ILi_INtJ-A985864 type: zfs status: ONLINE level: linear raw:
    size: 864 GiB free: 723 GiB zfs-fs: size: 837.25 GiB free: 696.36 GiB
  Components: Online: 1:
  Device-3: ILi_INtJ-B8702T61 type: zfs status: ONLINE level: linear raw:
    size: 2.61 TiB free: 2.1 TiB zfs-fs: size: 2.53 TiB free: 2.02 TiB
  Components: Online: 1:
Drives:
  Local Storage: total: raw: 11.38 TiB usable: 17.35 TiB
    used: 1.85 TiB (10.7%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 980 PRO with Heatsink 2TB
    size: 1.82 TiB temp: 37.9 C
  ID-2: /dev/nvme1n1 vendor: Kingston model: SNV2S4000G size: 3.64 TiB
    temp: 48.9 C
  ID-3: /dev/sda vendor: Samsung model: SSD 870 QVO 4TB size: 3.64 TiB
  ID-4: /dev/sdb vendor: Transcend model: TS2TSSD220Q size: 1.82 TiB
Partition:
  ID-1: / size: 480 GiB used: 186.77 GiB (38.9%) fs: btrfs dev: /dev/nvme0n1p2
  ID-2: /boot/efi size: 3.99 GiB used: 151.8 MiB (3.7%) fs: vfat
    dev: /dev/nvme0n1p1
Swap:
  ID-1: swap-1 type: partition size: 31.25 GiB used: 0 KiB (0.0%)
    dev: /dev/nvme0n1p5
  ID-2: swap-2 type: partition size: 31.25 GiB used: 0 KiB (0.0%)
    dev: /dev/nvme1n1p6
  ID-3: swap-3 type: partition size: 31.25 GiB used: 0 KiB (0.0%)
    dev: /dev/sda4
  ID-4: swap-4 type: partition size: 31.25 GiB used: 0 KiB (0.0%)
    dev: /dev/sdb4
Sensors:
  System Temperatures: cpu: 61.0 C mobo: N/A gpu: amdgpu temp: 43.0 C
  Fan Speeds (rpm): N/A
Info:
  Processes: 738 Uptime: 28m Memory: total: 32 GiB available: 31.22 GiB
  used: 11 GiB (35.2%) Init: runit Compilers: gcc: 13.2.1 clang: 16.0.6
  Packages: 1794 Shell: Bash v: 5.2.26 inxi: 3.3.31
%

rokytnji · 02-10-2024, 01:13 PM

Just wondering if bluez is installed with blueman-manager. Cuz bluez has

Quote:

usr/
usr/lib/
usr/lib/udev/
usr/lib/udev/hid2hci
usr/lib/udev/rules.d/
usr/lib/udev/rules.d/97-hid2hci.rules
usr/share/
usr/share/man/
usr/share/man/man1/
usr/share/man/man1/hid2hci.1.gz

and inxi shows hci2 and hcil as being down and unknown. Is ping test working . rfkill blocking anything? Maybe because it is azrock 2021 board. Gear too new? Just guessing.

hd_scania · 02-10-2024, 03:30 PM

Nothing has been blocked by rfkill,

Code:

doas rfkill
ID TYPE      DEVICE      SOFT      HARD
 0 bluetooth hci0   unblocked unblocked
 1 wlan      phy0   unblocked unblocked

And the wifi still goes down even when having restored the lost libs including firmware files from a backup Artix, entirely w/o being blocked by h/w i.e. UEFI BIOS
And kerbel and whose firmwares are always ok, but NM connection editor always reports "device not ready" somewhy, in nmtui wifi scans aren't even visible
And nmcli says it to be unavailable somewhy

Code:

wlan0: unavailable
        "Intel 6 AX210/AX211/AX411 160MHz"
        wifi (iwlwifi), 8C:B8:7E:54:7E:41, hw, mtu 1500

Quote:

Originally Posted by rokytnji

Just wondering if bluez is installed with blueman-manager. Cuz bluez has
and inxi shows hci2 and hcil as being down and unknown. Is ping test working . rfkill blocking anything? Maybe because it is azrock 2021 board. Gear too new? Just guessing.