sunfire x4100m2 server not booting
x4100 m2 server display not coming and it is not booting.
In the serial management port it is showing the following messages and after that nothing is coming.
U-Boot 1.1.1
custom GRASP U-Boot 1.3 (Apr 14 2008 - 06:33:11) r30859
MPC8272 Reset Status: External Soft, External Hard
MPC8272 Clock Configuration
- Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq 100-300
- dfbrg 1, corecnf 0x1a, busdf 4, cpmdf 1, plldf 0, pllmf 4
- vco_out 330000000, scc_clk 82500000, brg_clk 20625000
- cpu_clk 264000000, cpm_clk 165000000, bus_clk 66000000
- pci_clk 55000000
CPU: MPC8272 (HiP7 Rev 14, Mask A.0 1K50M) at 264 MHz
checkboard()
DRAM: 64 MB
FLASH: Flash is 256 sectors of 131072 bytes each
32 MB
readonly: ethaddr=00:21:28:28:B5:84
In: serial
Out: serial
Err: serial
misc_init_r()
reset_phy()
Whether it is the problem with service processor board?
|